Breha Pop Top/Roof/Canopy Lifter
Made from galvanised channels with zinc plated flat bar steel.
In 4 different sizes:
✓ 700mm channel will lift max. 550mm high (depending on weight of roof) 30kg (weighs 3kg per piece).
✓ 900mm channel will lift max. 700mm high (depending on weight of roof) 30kg soft (weighs 3.6kg per piece)
✓ 900mm channel will lift max. 700mm high (depending on weight of roof) 40kg strong (weighs 3.6kg per piece)
✓ 1200mm channel will lift max. 900mm high (depending on weight of roof) 35kg (weighs 5.5kg per piece)
✓ 1600mm channel will lift max. 1300mm high (depending on weight of roof) 35kg (weighs 9kg per piece)
✓ Spare parts available
- Roller and Rivet
- Standard Spring 900mm
- Soft Spring 900mm
- Spring 700mm
- Spring 1200mm
✓ Repairs available.
Important: Please be careful when opening the lifter, each one is taped up. Once the tape is cut the lifter opens very powerfully, so some sort of restraint should be in place. There is a label on the lifter to warn of this.
Installation: Due to individual manufacturer’s requirements please refer to their installation and or repair recommendations.
Made in Australia.